previous approach used SetEventCallback method which allowed
you to change the callback, unfotunately that also included
times after the goroutines were started and potentially firing
the callback.
checking lock on this would be too expensive, so instead we go
for an approach that allows callbacks to be registered by name
during process init(), then upon opening up an index a string
config key 'eventCallbackName' is used to look up the
appropriate callback function. also, since this string config
name is serializable, it fits into the existing bleve index
metadata without any new issues.
zap command-line tool added to main bleve command-line tool
this required physical relocation due to the vendoring used
only on the bleve command-line tool (unforseen limitation)
a new scorch command-line tool has also been introduced
and for the same reasons it is physically store under
the top-level bleve command-line tool as well
New APIs:
+ RollbackPoints()
- Retrieves the available list of rollback points: epoch+meta.
- The application will need to check with the meta to decide
on the rollback point.
+ Rollback()
- API requires a rollback point identified by the first API.
- Atomically & Durably rolls back the index to specified point,
provided the specified rollback point is still available.
+ Unit test: TestIndexRollback
- Writes a batch.
- Sets the rollback point.
- Writes second batch.
- Rollback to previously decided point.
- Ensure that data is as is before the second batch.
inserted to the list of dv enabled fields list -
DocValueFields in mem segment.
Moved back to the original type `DocValueFields map[uint16]bool`
for easy look up to check whether the fieldID is
configured for dv storage.
Observed problem:
Persisted index state (in root bolt) would contain index snapshots which
pointed to index files that did not exist.
Debugging this uncovered two main problems:
1. At the end of persisting a snapshot, the persister creates a new index
snapshot with the SAME epoch as the current root, only it replaces in-memory
segments with the new disk based ones. This is problematic because reference
counting an index segment triggers "eligible for deletion". And eligible for
deletion is keyed by epoch. So having two separate instances going by the same
epoch is problematic. Specifically, one of them gets to 0 before the other,
and we wrongly conclude it's eligible for deletion, when in fact the "other"
instance with same epoch is actually still in use.
To address this problem, we have modified the behavior of the persister. Now,
upon completion of persistence, ONLY if new files were actually created do we
proceed to introduce a new snapshot. AND, this new snapshot now gets it's own
brand new epoch. BOTH of these are important because since the persister now
also introduces a new epoch, it will see this epoch again in the future AND be
expected to persist it. That is OK (mostly harmless), but we cannot allow it
to form a loop. Checking that new files were actually introduced is what
short-circuits the potential loop. The new epoch introduced by the persister,
if seen again will not have any new segments that actually need persisting to
disk, and the cycle is stopped.
2. The implementation of NumSnapshotsToKeep, and related code to deleted old
snapshots from the root bolt also contains problems. Specifically, the
determination of which snapshots to keep vs delete did not consider which ones
were actually persisted. So, lets say you had set NumSnapshotsToKeep to 3, if
the introducer gets 3 snapshots ahead of the persister, what can happen is that
the three snapshots we choose to keep are all in memory. We now wrongly delete
all of the snapshots from the root bolt. But it gets worse, in this instant of
time, we now have files on disk that nothing in the root bolt points to, so we
also go ahead and delete those files. Those files were still being referenced
by the in-memory snapshots. But, now even if they get persisted to disk, they
simply have references to non-existent files. Opening up one of these indexes
results in lost data (often everything).
To address this problem, we made large change to the way this section of code
operates. First, we now start with a list of all epochs actually persisted in
the root bolt. Second, we set aside NumSnapshotsToKeep of these snapshots to
keep. Third, anything else in the eligibleForRemoval list will be deleted. I
suspect this code is slower and less elegant, but I think it is more correct.
Also, previously NumSnapshotsToKeep defaulted to 0, I have now defaulted it to
1, which feels like saner out-of-the-box behavior (though it's debatable if the
original intent was perhaps instead for "extra" snapshots to keep, but with the
variable named as it is, 1 makes more sense to me)
Other minor changes included in this change:
- Location of 'nextSnapshotEpoch', 'eligibleForRemoval', and
'ineligibleForRemoval' members of Scorch struct were moved into the
paragraph with 'rootLock' to clarify that you must hold the lock to access it.
- TestBatchRaceBug260 was updated to properly Close() the index, which leads to
occasional test failures.
+ Track memory usage at a segment level
+ Add a new scorch API: MemoryUsed()
- Aggregate the memory consumption across
segments when API is invoked.
+ TODO:
- Revisit the second iteration if it can be gotten
rid off, and the size accounted for during the first
run while building an in-mem segment.
- Accounting for pointer and slice overhead.
+ Adding new entries to the stats struct of scorch.
+ These stats are atomically incremented upon every segment
introduction, and upon successful persistence.
docValues are persisted along with the index,
in a columnar fashion per field with variable
sized chunking for quick look up.
-naive chunk level caching is added per field
-data part inside a chunk is snappy compressed
-metaHeader inside the chunk index the dv values
inside the uncompressed data part
-all the fields are docValue persisted in this iteration
Found with "versus" test (TestScorchVersusUpsideDownBoltSmallMNSAM),
which had a boolean query with a MustNot that was the same as the Must
parameters. This replicates a situation found by
Aruna/Mihir/testrunner/RQG (MB-27291). Example:
"query": {
"must_not": {"disjuncts": [
{"field": "body", "match": "hello"}
]},
"must": {"conjuncts": [
{"field": "body", "match": "hello"}
]}
}
The nested searchers along the MustNot pathway would end up looking
roughly like...
booleanSearcher
MustNot
=> disjunctionSearcher
=> disjunctionSearcher
=> termSearcher
On the first Next() call by the collector, the two disjunction
searchers would run through their respective Next() method processing,
which includes their initSearcher() processing on the first time.
This has the effect of driving the leaf termSearcher through two
Next() invocations.
That is, if there were 3 docs (doc-1, doc-2, doc-3), the leaf
termSearcher would at this point have moved to point to doc-3, while
the topmost MustNot would have received doc-1.
Next, the booleanSearcher's Must searcher would produce doc-2, so the
booleanSearcher would try to Advance() the MustNot searcher to doc-2.
But, in scorch, the leafmost termSearcher had already gotten past
doc-2 and would return its doc-3.
In upsidedown, in contrast, the leaf termSearcher would then drive the
KVStore iterator with a Seek(doc-2), and the KVStore iterator would
perform a backwards seek to reach doc-2.
In scorch, however, backwards iteration seeking isn't supported.
So, this fix checks the state of the disjunction searcher to see if we
already have the necessary state so that we don't have to perform
actual Advance()'es on the underlying searchers. This not only fixes
the behavior w.r.t. scorch, but also can have an effect of potentially
making upsidedown slightly faster as we're avoiding some backwards
KVStore iterator seeks.
This is somewhat like a simple, unit-test'ish version of testrunner's
random query generator, where this does not have a dependency on an
external elasticsearch server, and instead depends on functional
correctness when comparing to upsidedown/bolt.
Added an option to the kvconfig JSON, called "unsafe_batch" (bool).
Default is false, so Batch() calls are synchronously persisted by
default. Advanced users may want to unsafe, asynchronous persistence
to tradeoff performance (mutations are queryable sooner) over safety.
{
"index_type": "scorch",
"kvconfig": { "unsafe_batch": true }
}
This change replaces the previous kvstore=="moss" workaround.
Marty Schoch